The Wood-Mizer WM1000 saws large softwood, hardwood and tropical logs up to 1.7 metres in diameter. This sawmill uses narrowband, thin-kerf blades to deliver higher log yields than traditional large-log sawing methods.
Heavy-duty, accurate, and easy-to-use, the WM1000 features a massive cutting head that moves along a twin-rail frame to convert large logs into halves, quarters, finished boards, or cants for resawing. The operator controls all cutting functions while standing on a platform that moves with the head and includes electronic setworks for accurate cutting.
The WM1000 uses thin-kerf, narrow band blades that are 50 mm to 75 mm wide, resulting in significantly improved log yield and less wood waste.
Built to last and run effortlessly in industrial applications, it easily integrates into existing operations with low installation costs. Simply extend the rails to cut longer logs.
The Wood-Mizer WM1000 menggergaji kayu lunak, kayu keras, dan kayu bulat tropis berukuran besar dengan diameter hingga 1,7 meter. Penggergajian ini menggunakan mata pisau pita tipis dan tipis untuk menghasilkan kayu bulat yang lebih tinggi daripada metode penggergajian kayu besar tradisional.
heavy duty, akurat, dan mudah digunakan, WM1000 memiliki fitur kepala pemotong besar yang bergerak di sepanjang bingkai rel kembar untuk mengubah kayu bulat besar menjadi dua bagian, empat bagian, papan jadi, atau balok kayu untuk digergaji ulang. Operator mengontrol semua fungsi pemotongan sambil berdiri di atas platform yang bergerak dengan kepala dan termasuk setwork elektronik untuk pemotongan yang akurat.
WM1000 menggunakan bilah pita tipis dengan garitan tipis yang lebarnya 50 mm hingga 75 mm, menghasilkan peningkatan hasil kayu yang signifikan dan limbah kayu yang lebih sedikit
| Power | |
|---|---|
| Power | 22 kW Listrik 30 kW Listrik 37 kW Listrik |
| Kapasitas potong | |
| diameter kayu maksimum | 118 cm (Manual Bed) 163 cm (Manual Bed with Rail Support System) 170 cm (No Bed) |
| Diameter Log minimum | 50 cm |
| lebar kayu maksimum potong | 170 cm |
| lebar kayu maksimum | 170 cm |
| Lebar balok kayu minimum | 20 cm |
| kedalaman potong maksimum | 98 cm |
| Head Features dan opsi | |
| Setworks | SW10 |
| Head Naik/Turun | Elektrik (0.75 kW) |
| Head Maju mundur | Elektrik (1.1 kW) |
| Blade Guide Arm | Elektrik (2 x 0.25 kW) |
| Lubrikasi Gergaji | 2-sided Multi-point Blade Wheel Lubrication and Clining |
| Sistem Blade Tension | Hydraulic Tensioning Handle dengan alat pengukur |
| Debarker | N/A |
| Diameter Port Sawdust Collection | 150mm |
| Opsi Tambahan | Roller, Double Block Blade Guide ikut mengendarai pada station operator |
| Gergaji | |
| Panjang | 9800 mm |
| Lebar | 50 mm 75 mm |
| Roda gergaji | |
| Diameter Roda Gergaji | 1070 mm |
| Tipe Roda Gergaji | Non belted |
| Material Roda Gergaji | Steel |
| Bed Features dan opsi | |
| Konstruksi Bed | Twin Rail |
| Trailer Package | N/A |
| handling log | |
| Manual | 2-sisi Wedges yang dapat di sesuaikan |
| STANDARD Hydraulic | N/A |
| SUPER Hydraulic | N/A |
| Sawmill features dan opsi | |
| standar keamanan | CE |
| Tambahan | Rails: 2 x 10 m Rails: 2 x 5 m Raised Rails: 2 x 10 m Raised Rails: 2 x 5 m |
