The EG400 is a rugged board edger that is at home in commercial sawing businesses that require a fast, accurate, and heavy-duty board edger. The EG400 edges material 700mm wide by 100mm high at 30 metres per minute, and smaller material at up to 54 metres per minute.
The remote operator’s control console manages all edger functions, and can be repositioned as needed. The 22kW motor delivers plenty of power for softwoods and hardwoods. The edger automatically adjusts feed speed depending on the thickness of the board being cut. Two 400mm blades are mounted on a splined shaft and move in and out from the centre, allowing the use of an optional outfeed board conveyor.
Two lasers are standard on the EG400 for board positioning, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers. The standard infeed table is available with optional rip fences.
An optional tailer outfeed keeps the edged boards moving through the line, while enabling easy waste removal. Optional electronic setworks are available.
The EG400 adalah edger papan kayu yang cocok untuk bisnis penggergajian komersial yang membutuhkan edger papan yang cepat, akurat, dan heavy duty. Bahan tepi EG400 lebar 700mm kali tinggi 100mm pada kecepatan 30 meter per menit, dan bahan yang lebih kecil hingga 54 meter per menit.
Konsol kontrol operator jarak jauh mengelola semua fungsi edger, dan dapat diposisikan ulang sesuai kebutuhan. Motor 22kW menghasilkan banyak daya untuk kayu lunak dan kayu keras. Edger secara otomatis menyesuaikan kecepatan umpan tergantung pada ketebalan papan yang dipotong. Dua gergaji 400mm dipasang pada poros berjajar dan bergerak masuk dan keluar dari tengah, memungkinkan penggunaan konveyor papan outfeed opsional
| Pilihan Power | |
|---|---|
| Pilihan Power | 22kW (30HP) Listrik |
| Kapasitas potong | |
| Lebar Potong Maksimum | 72cm |
| minimum lebar potong | 76 mm (3") |
| maksimum tebal material | 100mm |
| Gergaji | |
| kecepatan gergaji | 2320 RPM |
| jumlah gergaji | 2 |
| diameter gergaji | 400mm |
| kerf gergaji | 7mm |
| metode pengaturan gergaji | Electric |
| posisi gergaji | dua blades di tengah |
| feed system & operasi | |
| Feed Speed | 100mm material: 13m/min 50mm material: 24m/min 25mm material: 34m/min |
| Board Reverse System | feed rollers terbalik untuk menghindari macet |
| pencegahan papan terlempar kebelakangan | Anti Kick-back fingers |
| penyelarasan papan | 2 Lasers |
| Hold-down (penekan) Material | Powered Steel Rollers |
| kontrol operator | Stationary Control Station |
| Setworks | Setworks opsional |
| Feed System | Rubber Infeed & Outfeed Belts (karet) |
| Tambahan | Heavy-duty outfeed tailer |
| dimensi mesin dan persyaratan | |
| lebar | 1.6m |
| kebutuhan listrik | 400V 50Hz 3Ph 70A |
| standar keamanan | CE |
