The TITAN HR4000 Twin Head Resaw offers ultra-fast size changes during the resawing process. As little as 0.3 seconds is needed to change the size for each and every sideboard (depending on thickness), even when feeding at over 20 pieces per minute (depending on board length). As a result optimal recovery is achieved, unlocking extra product that previously would have gone to waste.
Importantly, no sorting of material is needed prior to this machine. With its large 100 - 125 mm (4-5 inch blades), the TITAN HR4000 model is capable of faster feed speeds, thereby offering higher production capacity. By using a Twin Head configuration, it is possible to make two cuts into each sideboard with only one pass.
KEY FEATURES:
• Feed speeds up to 60 m/min
• Compatible for blade sizes: 100 or 125 mm
• Throat width 430 mm
• Single or twin-head configurations
• Electric servo sizing system for fast size changes – under 0.3 seconds! (depending on thickness)
• Heavy duty slatt-chain feed with variable speed
• Powered hold-down rollers on both the in- and out-feeds for fast, accurate material feed
• Robust TITAN headrig column for high strain, high speed sawmilling
* available in single or twin head configurations
Mesin HR4000 Twin Head Resaw menawarkan perubahan ukuran ultra-cepat selama proses resawing. Sedikitnya 0,3 detik diperlukan untuk mengubah ukuran setiap sideboard (tergantung ketebalan), bahkan saat mengumpan lebih dari 20 buah per menit (tergantung panjang papan). sebagai Hasilnya recovery kayu optimal tercapai, memberi produk tambahan yang sebelumnya terbuang sia-sia.
Yang penting, tidak diperlukan penyortiran material sebelum mesin ini. Dengan besar 100 - 125 mm (pisau 4-5 inci), model HR4000 mampu memberikan kecepatan umpan yang lebih cepat, sehingga menawarkan kapasitas produksi yang lebih tinggi. Dengan menggunakan konfigurasi Twin Head, dimungkinkan untuk membuat dua potong pada setiap sideboard hanya dengan satu kali jalan
| Pilihan Power | |
|---|---|
| Pilihan Power | 22kW (30HP) Listrik30kW (40HP) Listrik |
| Kapasitas potong | |
| Lebar balok Kayu Maksimum | 0.42m |
| minimum tinggi balok kayu | 15 mm |
| maksimum tinggi balok kayu | 320mm |
| Gergaji | |
| Sistem Blade Tension | Hydraulic dengan spring (airbag optional) |
| Lebar roda gergaji | 100mm |
| Diameter Roda Gergaji | 950mm |
| Tipe Roda Gergaji | Roda Crowned steel |
| Lebar Gergaji | 100mm125mm |
| head feature & opsi | |
| Head Naik/Turun | Electric servo sizing system |
| jumlah cutting head yg tersedia | Single / Twin / Multi-head |
| konfigurasi kontrol | Control Station berdiri sendiri (tepisah) |
| feed system & operasi | |
| Feed Speed | control variable feed speed elektronik0 - 60m/min (motor and blading dependant) |
| Feed Motor | 1.5kW (2HP) |
| Hold-down (penekan) Material | Powered Pneumatic Hold-down Rollers |
